Tag Archives: gates

Petworthgates.co.uk +1 year!

Posted on by
Reply
Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, Tijou, Petworth, Petworth House, Jean Tijou, Petworth Gates, Brawn and Downing

The fully restored ‘Tijou Gates’ at Petworth House, West Sussex. Photo by Julian Smith

Back to Petworth House to check over the gates we finished restoring this time last year. Looking good! Never ceases to amaze me how difficult it can be to photograph large ironwork installations….. Hence a picture from last winter. I have to thank the very talented Julian Smith for capturing the gates in thier true glory. #blacksmith

For more information about the project www.petworthgates.co.uk

Or check out previous posts about Restoration of ‘Tijou’ Gates at Petworth House. and ‘Tijou’ gates.

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, Tijou, Petworth, Petworth House, Jean Tijou, Petworth Gates, Brawn and Downing

‘Tijou Gates’ at Petworth House, West Sussex. Photo by Julian Smith

 

Wrought Iron Gate

Posted on by
Reply
Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, gate, wrought iron gate

Wrought Iron Gate

Tis’ the season to make gates.

Coming into the gate season once again, the enquiries are coming in thick and fast. Regretfully I had to turn away quite a few in 2013 as we we’re fully occupied  and at capacity with an enormous pair at called the ‘Tijou’ gates at Petworth House. This year we are fully open for designing and making some, big and small. I love making gates!

Gates are pretty useful, they do the obvious! But have you thought a bit more about it? They can be used as focal point to draw your attention to or away from an area, they can extend a view or foreshorten, block and frame. They add texture and colour perhaps. They can definitely make a statement; but be careful with that one, because if you buy one from us the gate will last a very long time. Ultimately if you buy a designed, hand made one they add value and quality!

Its so important to have it designed for you, don’t just buy it because you like the one you see on a website from a bloke 100 miles away, it is unlikely to turn up as it looks on the webpage and it doubtful you’ll get much recourse when things don’t go you way. Make the blacksmith earn his money, because unfortunately they aren’t cheap. Compared to the tinpot ones at the garden centre they are very expensive, but so is a Christmas Turkey compared with a can of chopped tomatoes. Like the analogy, its a treat for a special occasion. You could afford to buy tomatoes most weeks, but they are just……. I’m going away from my point here, I hope you get my drift?

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, wrought iron gate, gate, iron gate

Wrought Iron gate detail, showing construction and alternative finish

Get your chosen Blacksmith to come out, measure up and talk to you, discussing the possibilities and your options. Remember gates don’t have to have scrolls and spearheads (god help me), some of the nicest and timeless designs are just rails and stiles. Detail is everything, textured bars, mortise and tenon joints, punched bars so that one passes through the next, half lap joints, rivets and sets, curves and corners, perhaps variants on twists (not that old barley twist you have on your fire poker), forged balls, changes of section and good old fire welded detail, mixed media looks good too, try adding in wood, glass or whatever. If your Blacksmith doesn’t mention any of these simple things, please don’t use him. Definitely don’t use him if he doesn’t show you some of his own designs, you know the ones, they are called ‘drawings’…… if he can’t draw, getting across his plans and intentions, its unlikely you’ll end up with what you want or deserve.

The design(s) that arrives with your quotation (why should he/she give an estimate, its a gate?) should reflect your meeting and discussion, taking account of the site situation, house design and all the personal factors that a bespoke service delivers. If you don’t like what you see or the price, just say, most designers and artists have a back up plan for such eventualities, well, I do! And if you do like it but want it tweaked, don’t be afraid to to mention it either.

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, gate, wrought iron gate, iron gate

Finishing touches to installation of wrought iron gate.

Did you talk about finishing and installation? Well your Blacksmith should have mentioned it, finishing is so important. Your gate is likely to be made form forged Mild Steel, it rusts I’m afraid, and once it starts you are unlikely to stop it. So included in the quote should be a zinc application of some sort Galvanizing is the toughest or Hot zinc spraying gives the best finish, both will protect your investment, don’t confuse zinc powder spray with hot zinc spaying, its not the same.

Then after that it needs painting professionally with a quality paint system. You shouldn’t need to worry about that because the Blacksmith will have included that? Well, I do. There are options of finish, once its protected against rust you can do what you like within reason, graphite loaded paints, phosphated zinc, you name it.

Installation, if the Blacksmith doesn’t include that you should be suspicious; they have gone to all that trouble to design it, make it, finish it…. they not going to let it out of their sight until its up and safe… are they? If they don’t care how its installed they probably didn’t care in the first place. Nuff said!Having the gate installed (and working) by the Blacksmith who made it should be the indicator that the job is done and it time to pay the balance of the bill (you would have paid a deposit to start). That’s it? Well ask about aftercare, quality gates don’t need painting to often, once every 6 or 7 years maybe, they can be washed off in between, maintaining the finish by cleaning off algea etc. don’t use caustic soaps though, Washing up liquid is the worst, car shampoo is OK, or just water!

Any problems, get them back to fix it. Remember you have paid a good price and deserve proper service, a reputable Blacksmith will want you quiet as soon as possible, commending him/her for their speedy attention to the problem.

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, gates, entrance gates, Iron gates

Contemporary entrance gates

Not a gate?

Posted on by
Reply

Original Arts & Crafts, conserved and displayed.

When is a gate not a gate?

When its a piece of Art?

These lovely gates date from the late 19th Century (that’s Victorian if your British). We conserved these gates for a private client. Luckily for the gates the client is an Art professional, who realized their value culturally and financially. They we’re rescued from a salvage/reclamation yard a few years ago purchased with no provenance. The client wanted to use them as a feature somewhere in the house or gardens of her beautiful Edwin Luytens/Gertrude Jeykell designed Arts & Crafts House.

In consultation with Burrows Lea Forge Ltd. she was only to aware that the first rule of conservation had been broken; moving a piece from its original location. Nothing could be done about that now, but there was an opportunity to embrace another Conservation rule, namely if a piece is in danger in its location, it should be moved to a more suitable (preferably permanent) site.

Detail of Arts & Crafts gate.

These gates are very special, they are in an Arts & Crafts style, expertly balanced  and we suspect they were originally commissioned for a civic building, church or public office. There is an enormous level of detail, demanding top level forging skills. Interestingly and in the spirit of Arts & Crafts, the Artisan was only too aware of his excellent work and deliberately allowed ‘schoolboy’ errors in the setting the piece. As a craftsman I can easily identify what’s going on, the technical execution is so expert, it makes a joke of the deliberate errors, I suspect the Blacksmith responsible, might have hoped a Peer will see through his fakery, as I would in his situation. Well, I have!

Its amazing the time-shift a skill or craft can breach; you can get inside the head and empathize with someone long gone. Conservation and restoration does this, as you look closely, respecting the work of others, you can truely see inside their minds and feel what they must felt as they ‘turned’ a scroll or ‘pinched’ a collar or made a small mistake! Its a marvelous thing.
Back to the job! The client thought about the best use of the gates for quite a while and eventually with our guidance decided for us to install them in the covered arch way to the old coach-house of her property. The bare wall of the inner arch was crying out for some sort of ‘interest’. So we installed the gates on the wall. We were conscious to install them high enough to be aesthetically acceptable and safe from the prevailing weather. We used the original hinge mounts fixing them with stainless steel fixings into the Bargate stone wall. Mindful all the time of reversibility of of our actions.
So the gate went up, they looked great and as you can see there is  as much on show today, no less than there was 100 years ago, with any luck, 100 years from the view will be the same.

THAT”S CONSERVATION! sorry  I meant ART.

Gallery!

Posted on by
2

Forged and painted flower, Middle Street, Shere.

In these pages I hope to show you what we’ve been up to over the last twenty or so years.

The pictures in Gallery pages are mostly my own designs and if they are not, the designer is accredited. Where the designs are solely Burrows Lea Forge’s they will carry an Artist copyright and cannot be copied or used without my permission. The work itself is entirely ours, I don’t show pictures of other peoples work! With that said I hope you like what you see and don’t forget to give me a click or call if you want more information.

We’ve done a lot of work for a small company and worked very hard to keep solvent and good humored. I’ve worked with many Smiths, Designers and Architects since 1992 and where possible (and justified) I’ve accredited those involved. Somewhere in the Web process I might have missed someone or another, it won’t be deliberate, so don’t sue me or anything. If you are missing and feel you deserve some credit please don’t hesitate to drop me a line or call and bend my ear.

Bacchus Gate

Posted on by
Reply

In July 2008 the Bacchus gate came to life in a sketch, doodled in crayon (because that’s all I had), in front of the customer on a spiral pad (because that’s all I had).  Ever the professional, I had left my site bag in my other van. I was warned by a very well know Blacksmith friend of mine never to do this as it can look amateur and may commit you to something you might regret. I’m sure he’s right!

But I would disagree on one account, I often find sketching quite liberating and often catches the moment far better than memory ever can. Even a few lines can remind you later of what was happening at the time. I have to work very hard when it comes to sketching, I can technically draw very well and I can do formal drawing without to much trouble, but to do ‘off the cuff’ doodles I have to be careful. But this time it was like a dream, it flowed and as the client described what he was trying to achieve for his home.

Bacchus gate detail.

We discussed Bacchus, the god of indulgence, the Horn of Plenty, grapes, fruit and what too many good times can do to you. So a Horn of Plenty Gate adorned with vines, fruit and a bit wobbly was the result…… perfect as the gate was to be sited at the head of a narrow stair to a wine tasting cellar, against a rustic brick wall and to be seen from a French Provence inspired kitchen.
So I scaled the design up from the folded paper to full size and handed it over to the workshop. They did a brilliant job. It was one of those jobs that everyone enjoyed, the money was right, the design was perfect and there was plenty of scope for free form interpretation. The gate and a small panel were finished in a Slate grey finish that my Friend Andy Quirk showed me how to make up and apply.

I wish that so many other jobs went this way…… the client was also delighted!

Bacchus Gate and Panel

Restoration of ‘Tijou’ Gates at Petworth House.

Posted on by
2
Acanthus Rosette

Acanthus Rosette on existing Gates in need of Conservation

September 2012 Burrows Lea Forge Ltd. won the tender commissioned by The National Trust to Restore the ‘Tijou’ Gates at Petworth House, West Sussex, England,

The Contract is signed and the Purchase Order complete. This is a dream job for us and probably most British Blacksmiths (the ones that actually hot forge their metalwork that is!). The Gates need Conserving and Restoring to their former glory.

Tender test piece 200 x 200mm x 12g, mild steel, Acanthus Rosette made by Nick Bates

Despite being known locally as the Tijou Gates, they are in fact Victorian opposed to early Georgian. That doesn’t mean they are any less in character or quality. In fact I believe Victorian Acanthus Work of this quality is in a league of its own, being almost perfect in charachter and execution, without the wasteful  excess of the Master Ironworker ,Jean Tijou.

The reason they are known as the ‘Tijou’ gates is that they are based upon his design, a design the man himself used on three occasions at Hampton Court Palace. The most notable is the last incarnation, commissioned by George I, known as the Lion Entrance Gates facing Bushy Park.

This a big job for us, at least 30 weeks. So my Blogs from now on will consist mainly of notable previous work, no less interesting though. There are still a few new things in the pipeline, namely our Conservation of The Durdan Gates at Epsom, UK and our latest Public Art commission for Guildford Borough Council. at Burpham, Surrey, UK.

I’m writing a separate Blog for the ‘Tijou’ Gates as it will take up so much of my time, please take a look though if you are interested Petworth Gates.

‘Tijou’ Gates Circa 1900

A ‘Finished’ Gate

Posted on by
Reply
A finished Gate

A finished Wrought Ironwork Gate

This article follows the completed journey of the gate that we were riveting up in the last but one blog ‘Making gates’.

After that video clip was taken, the gate was completely hot riveted up. The locks and fittings were checked for correct alignment and operation and all the ground markers and set up indicators chiselled in.

During the time between that and this article, the gates had been delivered to specialist finishers. The finishers shot basted the metal to clean and create a ‘key’ for molten zinc to be sprayed manually on to the surface to create a cathodic protective layer (Hot zinc spraying). This layer provides electro/chemical protection of the mild steel gate frame….. I’m conscious not to be too technical here.… meaning most of  the zinc has to be corroded away before the mild steel gets attacked by rust.

The gate is then primed, undercoated and top coated in the conventional way, we use synthetic based vinyl paints, but with the cathodic protection in place, you could specify any suitable coloured exterior finish. Whatever the finish, as long as the zinc coating is not exposed too much to the elements by way of a sensible maintenance schedule the Ironwork should unlimited service and exceptionally longer than a painted finish alone.

Time to install the Ironwork, with the paint finish cured and safe to handle, we fitted the gate into its final position as seen it the photo above, in this case we dug holes and concreted the hanging panel and closing post in to the ground. We use a product known as PostCrete, to which we add large aggregate and water, having already spaced and levelled the ironwork ‘tails’ in the holes we hard pack the dryish mix in; within 30 minutes the ironwork structures are ready to accept light/controlled loads. We always ask the client to limit  use during the first 48 hours, so the foundations have a chance to cure properly.

So, why hot zinc spray? We want our work to last as long as economically possible (as do our customers), Hot Zinc Spraying offers delicate or detailed mild steel structures the best balance between protection against rusting and retention of hot forged detail. The last thing we want is our beautiful work covered in a thick coating of ‘whatever’; this may be ‘very’ desirable for lesser craftsmen, but not us! So in short, painted, quality exterior Ironwork where detail and textures are important, always specify Hot Zinc Spraying prior to a paint system being used.

An Important note to Professionals and Specifiers!  Hot dipped Galvanising or Electroplating should not be specified as an acceptable alternative to Hot Zinc Spraying. It should be specified for the reasons in ‘Why hot zinc spray?’ (previous paragraph). Hot zinc spraying is sometimes  referred to as Metalizing and is related to a thermal process known as Sherardizing. Electroplating is a cold process and uses a surface application of zinc to inhibit corrosion on iron and mild steel, but due to the very thin coating of zinc applied it is not suitable for long term exterior applications. There is a limit to  the size and shape that can be treated in Plating and Sherardizing processes and to a greater degree the Hot dipped Galvanizing process,; there is no size  limit to Hot zinc spraying, as the treatment (and its prep-process, shot blasting) is brought to the metalwork opposed to the metalwork being presented to the treatment.

Arts & Crafts Gate.

Posted on by
Reply
Hurst Lea Gate

Hurst Lea Arts & Crafts Gate

To follow on from the last blog, I picked out of our archive a very fine gate  that we designed and made in 2008. Needless to say it is hand forged in the way as I mentioned in ‘Making Gates”

It was inspired by the striking Arts & Crafts house it belongs to. The arched top of the gate appears frequently throughout the building’s architecture. The adjoining garden needed some sort of entrance/frame/pointer so it was a natural choice to include it in the design. The in-fill was an open brief so I used a few signature shapes and scrolls, bearing in mind all the time the Arts & Crafts style. I left the middle of the gate fairly open to allow a clear view through and to frame the garden vista.

The gate is mounted on a pair of solid 40mm square posts. The ironwork was hot zinc sprayed to provide cathodic protection and the finished in a conventional manner. The last coat of paint applied was graphite loaded, so the ironwork could be polished to add a graphite  patina lustre.

Making Gates.

Posted on by
2
Forging a gate.

Hot riveting the dog bars on a traditionally made gate.

You can get a gate made pretty much anywhere that work with metal.

Burrows Lea Forge is not a general workshop, we’re Blacksmiths and we hot forge our work, there is a big difference! When you forge iron and steel, you improve the quality of metal. When a blacksmith makes a product such as a gate its assembled from many individual bespoke components, each one tailored to fit not only into the design, but interacts physically to its jointed companions.

The crafted assembly acts as one complete unit and if done well, is far superior aesthetically and mechanically to one made by other methods such as arc welding. The end product very different, even if its function is the same, there is of course a difference in price,  it takes time to make all those components fit perfectly, not to mention the individuality that goes with that process. To arc weld a gate together takes no time at all and doesn’t demand much skill or resource apart from having a steady hand, something to cut metal with and an Arc welding unit.

Here’s the link to the video we’ve made to partly explain the difference in the way our gates are made, as time goes on and the opportunity arises we’ll add more to this site and youTube.

Swaines Hill Gates, Hampshire.

Posted on by
Reply
Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, Entrance Gates, Wrought Iron Gates, Designed Gates

The gates installed in Hampshire

This one half of a pair of gates we designed and made last year (2011) and are worth a revisit. The gates are made from very large, solid sections of mild steel and are fully hammer textured. There is extensive hot riveting throughout the construction. Unfortunately the picture shows how difficult it is sometimes to photograph ironwork satisfactorily.

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing, Gates, Wrought Iron Gates, Entrance Gates

Media collage of the gates in Hampshire.

So much to say about this project and I promised there would be a specific article, but it never materialised; its on my to do list now so something will happen shortly! Keep checking the Instagram, Facebook and Twitter feeds for more info on this one and others. There are widgets at the side of the article to save you logging on if you just want to see what’s going on today.

Blacksmith, Hand forged, Design, Ironwork, Forge, Wrought Ironwork, Hot Forged, Blacksmithing

Swainshill Gates, Hampshire, photo taken by Chris Potts, Sienna Earth